Fence Guard™
Stain Concentrate
1.5 and 5 Gallon

Introducing Fence GuardTM, from U-C Coatings the Leader in Wood Protection and the makers of Seal-Once and Anchorseal wood protection products. Fence Guard stain concentrate is available in four popular semi-transparent colors: Espresso, Cocoa Brown, Western Redwood, and Sierra Cedar. This is a water-based alkyd formula which provides penetrating oil finish but with easy water clean-up and ultra-low VOC. Fence Guard dilutes with 2 parts water to 1 part concentrate to produce a cost effective, high-quality penetrating stain for wood fences of all types. Fence Guard offers superior protection against the elements, with fade resistant high quality pigments and long-lasting water repellency.

This product is concentrated and must be diluted with 2 parts water to 1-part product, to create an effective working stain solution.

  • 1.5 Gallon of concentrate makes 4.5 gallons of stain. Available in Espresso, Cocoa Brown, Western Redwood, Sierra Cedar.
  • Ultra-Low VOC Penetrating oil-like finish with easy soap and water cleanup. Contains no noxious solvents or toxic chemicals.
  • Excellent adhesion and even coverage for cedar, spruce, pine, and fir, and pressure treated wood type fences
  • Extends the natural life of wood fencing with superior water repellency and protection against harmful UV rays
  • Resists cracking, peeling, and fading


  • Wood Fences
  • Softwood
  • Cedar
  • Pine
  • Pressure Treated Wood
  • Spruce


  • Eco-safe
  • Non-toxic
  • Ultra-low VOC
  • Water based formula
  • Will not peel
  • Soap & Water cleanup
  • Enhances natural grain of the wood
  • UV Protection
  • Water Repellency 
  • Long Lasting Color Resists Fading

Product Preparation

  • The product in this container is in concentrated form and must be diluted with 2-parts water to 1-part product, to create an effective working stain solution. Prior to dilution, the concentrate should be mixed or shaken, ensuring no settling on the bottom. Once the concentrate is thoroughly mixed, pour the desired amount into an appropriately sized container for dilution with water. Add the 2 parts water for each part stain concentrate and stir the concentrate-water blend thoroughly to get the diluted working solution to a uniform consistency and color. The working solution should be stirred frequently during the application period to prevent settling and maintain uniform color and consistency.

Surface Preparation

  • The ultimate performance of this stain in terms of quality of appearance and longevity, depends on underlying wood surface conditions and proper preparation. Any previously applied stains or sealers should be thoroughly removed. Any mold or mildew as well as any surface soil, including oil or grease stains, should be cleaned off thoroughly using a solution of three parts water to one part household bleach. Scrubbing may be required in heavily discolored areas. Strippers or cleaners used in preparation for staining must be completely rinsed off and the fence surface allowed to dry. The wood surface must be dry to the touch.


  • Do not use if rain is expected with 24 hrs. Apply at temperatures above 45 Degrees F and below 95 Degrees F. Protect any surrounding surfaces from overspray. Do an initial test application of the stain in an inconspicuous area to be assured of having the desired final color and appearance. The stain working solution can be easily applied using a brush or roller, garden pump sprayer or airless sprayer. One generous coating is recommended. If a second coat is to be applied, allow no more than 25 minutes between coats. The stain should be dry to the touch in under 6 hours, although actual drying time can vary depending on temperature and humidity.

Cleanup & Storage

  • Painting tools can be cleaned easily with soap and water. Any unwanted drips or stain marks on walkways, plants, etc. should be cleaned up before they dry and can be removed by thorough rinsing of the areas with a garden hose. Light scrub-bing may be required in some instances, in conjunction with thorough rinsing. Any leftover product or diluted working stain solution should be stored in a cool space in an air-tight container. Both concentrate and diluted product should be protected from freezing. Concentrate can be stored for re-use for up to 6 months.


  • Never pour left over material down a drain or sink. Do not incinerate closed containers. For more precise disposal guidelines in your area, contact your local waste management agency.

Safety Precautions

  • Use with adequate ventilation. Keep out of the reach of children. Close container after use. If spraying, use an approved NIOSH/ MSHA respirator. Avoid contact with eyes. If splashed into eyes, rinse with clean water for 15 minutes. If skin irritation occurs, wash area with soap and water. Do not take internally. If accidentally ingested, immediately drink two glasses of water and contact a physician, do not induce vomiting.

Packaging Sizes

  • 1.5 Gallon of Concentrate: Approximately 4.5 Gallon of stain.
  • 5 Gallons of Concentrate: Approximately 15 Gallons of stain.


  • 4.5 Gallons of prepared stain covers 675 Square Feet.
  • 15 Gallons of prepared stain covers 2250 Square Feet.

Limited Liability: 

In the event Fence Guard Stain Concentrate®, when used according to the product instructions, fails to resist water damage, color fade, mold and mildew for three (3) years on wood fences, U.C Coatings, LLC, at its option, shall either replace the product or refund the purchase price. U.C Coatings, LLC shall have no liability for any other damages or labor costs of any kind, whether direct, incidental, consequential, punitive, or otherwise, for any defect in its products.  U.C Coatings, LLC’s liability and warranties cannot be modified or extended by its manufacturer’s representatives, distributors, or dealers of U.C Coatings, LLC products.